[ 0.000000] Linux version 6.12.38+deb13-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.38-1 (2025-07-16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=6836c18b-7345-4600-a6bc-cc0516e48aa0 ro quiet vsyscall=emulate [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffbffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffcfbff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffcfc00-0x00000000dfffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000001ffffe000-0x00000001ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Dell Computer Corporation PowerEdge 2850/0T7971, BIOS A04 09/22/2005 [ 0.000000] DMI: Memory slots populated: 6/6 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.087 MHz processor [ 0.001932] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001939] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001951] last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.001964] MTRR map: 8 entries (5 fixed + 3 variable; max 21), built from 8 variable MTRRs [ 0.001968] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.002131] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.002140] last_pfn = 0xdffcf max_arch_pfn = 0x400000000 [ 0.017493] found SMP MP-table at [mem 0x000fe710-0x000fe71f] [ 0.018696] RAMDISK: [mem 0x31e11000-0x34efffff] [ 0.019331] ACPI: Early table checksum verification disabled [ 0.019339] ACPI: RSDP 0x00000000000FD5B0 000014 (v00 DELL ) [ 0.019350] ACPI: RSDT 0x00000000000FD5C4 000038 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019362] ACPI: FACP 0x00000000000FD620 000074 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019373] ACPI: DSDT 0x00000000DFFC0000 0038CA (v01 DELL PE BKC 00000001 MSFT 0100000E) [ 0.019381] ACPI: FACS 0x00000000DFFCFC00 000040 [ 0.019386] ACPI: APIC 0x00000000000FD694 0000D4 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019393] ACPI: SPCR 0x00000000000FD774 000050 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019400] ACPI: HPET 0x00000000000FD7C4 000038 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019407] ACPI: MCFG 0x00000000000FD7FC 00003C (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019413] ACPI: Reserving FACP table memory at [mem 0xfd620-0xfd693] [ 0.019416] ACPI: Reserving DSDT table memory at [mem 0xdffc0000-0xdffc38c9] [ 0.019419] ACPI: Reserving FACS table memory at [mem 0xdffcfc00-0xdffcfc3f] [ 0.019421] ACPI: Reserving APIC table memory at [mem 0xfd694-0xfd767] [ 0.019423] ACPI: Reserving SPCR table memory at [mem 0xfd774-0xfd7c3] [ 0.019425] ACPI: Reserving HPET table memory at [mem 0xfd7c4-0xfd7fb] [ 0.019427] ACPI: Reserving MCFG table memory at [mem 0xfd7fc-0xfd837] [ 0.019616] No NUMA configuration found [ 0.019619] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.019638] NODE_DATA(0) allocated [mem 0x21ffd0680-0x21fffafff] [ 0.020245] Zone ranges: [ 0.020247] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020251] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020255] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.020258] Device empty [ 0.020260] Movable zone start for each node [ 0.020264] Early memory node ranges [ 0.020265] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.020268] node 0: [mem 0x0000000000100000-0x00000000dffbffff] [ 0.020271] node 0: [mem 0x0000000100000000-0x00000001ffffdfff] [ 0.020274] node 0: [mem 0x0000000200000000-0x000000021fffffff] [ 0.020277] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.020291] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020400] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.055565] On node 0, zone Normal: 64 pages in unavailable ranges [ 0.055572] On node 0, zone Normal: 2 pages in unavailable ranges [ 0.055883] ACPI: PM-Timer IO Port: 0x808 [ 0.055909] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.055914] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.055917] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.055919] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.055921] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.055923] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.055925] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.055928] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.055940] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.055947] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55 [ 0.055953] IOAPIC[2]: apic_id 10, version 32, address 0xfec83000, GSI 64-87 [ 0.055957] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.055961] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.055970] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.055972] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.055984] ACPI: SPCR: SPCR table version 1 [ 0.055988] ACPI: SPCR: console: uart,io,0x3f8,9600 [ 0.056003] CPU topo: Max. logical packages: 4 [ 0.056005] CPU topo: Max. logical dies: 4 [ 0.056006] CPU topo: Max. dies per package: 1 [ 0.056017] CPU topo: Max. threads per core: 2 [ 0.056019] CPU topo: Num. cores per package: 1 [ 0.056020] CPU topo: Num. threads per package: 2 [ 0.056022] CPU topo: Allowing 4 present CPUs plus 4 hotplug CPUs [ 0.056050] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.056055] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.056058] PM: hibernation: Registered nosave memory: [mem 0xdffc0000-0xffffffff] [ 0.056061] PM: hibernation: Registered nosave memory: [mem 0x1ffffe000-0x1ffffffff] [ 0.056064] [mem 0xf0000000-0xfebfffff] available for PCI devices [ 0.056068] Booting paravirtualized kernel on bare hardware [ 0.056074] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.069882] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.072756] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.072779] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.072785] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.072827] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=6836c18b-7345-4600-a6bc-cc0516e48aa0 ro quiet vsyscall=emulate [ 0.072953] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64", will be passed to user space. [ 0.077783] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.080278] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.080558] Fallback order for Node 0: 0 [ 0.080571] Built 1 zonelists, mobility grouping on. Total pages: 2096989 [ 0.080575] Policy zone: Normal [ 0.080596] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.080611] software IO TLB: area num 8. [ 0.217279] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.217523] Kernel/User page tables isolation: enabled [ 0.217713] ftrace: allocating 45713 entries in 179 pages [ 0.231575] ftrace: allocated 179 pages with 5 groups [ 0.233150] Dynamic Preempt: voluntary [ 0.233495] rcu: Preemptible hierarchical RCU implementation. [ 0.233497] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.233501] Trampoline variant of Tasks RCU enabled. [ 0.233502] Rude variant of Tasks RCU enabled. [ 0.233503] Tracing variant of Tasks RCU enabled. [ 0.233505] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.233507] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.233542] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.233548] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.233553] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.247312] NR_IRQS: 524544, nr_irqs: 1576, preallocated irqs: 16 [ 0.247639] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.252408] Console: colour VGA+ 80x25 [ 0.252415] printk: legacy console [tty0] enabled [ 0.252802] ACPI: Core revision 20240827 [ 0.253019] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.253042] APIC: Switch to symmetric I/O mode setup [ 0.253590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.273042] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0316cf57a, max_idle_ns: 440795281927 ns [ 0.273059] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.17 BogoMIPS (lpj=12768348) [ 0.273103] CPU0: Thermal monitoring enabled (TM1) [ 0.273148] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 [ 0.273153] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.273161] process: using mwait in idle threads [ 0.273166] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.273173] Spectre V2 : Mitigation: Retpolines [ 0.273175] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.273178] Speculative Store Bypass: Vulnerable [ 0.273182] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.273184] MMIO Stale Data: Unknown: No mitigations [ 0.273190] x86/fpu: x87 FPU will use FXSAVE [ 0.312390] Freeing SMP alternatives memory: 40K [ 0.312419] pid_max: default: 32768 minimum: 301 [ 0.313524] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.314033] landlock: Up and running. [ 0.314036] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.314233] AppArmor: AppArmor initialized [ 0.314285] TOMOYO Linux initialized [ 0.314736] LSM support for eBPF active [ 0.315252] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.315314] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.424901] smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.20GHz (family: 0xf, model: 0x4, stepping: 0x3) [ 0.425050] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.425050] ... version: 0 [ 0.425050] ... bit width: 40 [ 0.425050] ... generic registers: 18 [ 0.425050] ... value mask: 000000ffffffffff [ 0.425050] ... max period: 0000007fffffffff [ 0.425050] ... fixed-purpose events: 0 [ 0.425050] ... event mask: 000000000003ffff [ 0.425050] signal: max sigframe size: 1440 [ 0.425050] rcu: Hierarchical SRCU implementation. [ 0.425050] rcu: Max phase no-delay instances is 1000. [ 0.425050] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.425050] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.425050] smp: Bringing up secondary CPUs ... [ 0.425050] smpboot: x86: Booting SMP configuration: [ 0.425050] .... node #0, CPUs: #1 #2 #3 [ 0.431055] Transient Scheduler Attacks: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.433248] smp: Brought up 1 node, 4 CPUs [ 0.433248] smpboot: Total of 4 processors activated (25536.69 BogoMIPS) [ 0.485205] node 0 deferred pages initialised in 52ms [ 0.485205] Memory: 8074248K/8387956K available (16384K kernel code, 2486K rwdata, 11788K rodata, 4148K init, 4952K bss, 307928K reserved, 0K cma-reserved) [ 0.485300] devtmpfs: initialized [ 0.485300] x86/mm: Memory block size: 128MB [ 0.489241] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.489331] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.489810] pinctrl core: initialized pinctrl subsystem [ 0.493111] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.494169] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.494705] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.495292] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.495361] audit: initializing netlink subsys (disabled) [ 0.497209] audit: type=2000 audit(1754921767.244:1): state=initialized audit_enabled=0 res=1 [ 0.497505] thermal_sys: Registered thermal governor 'fair_share' [ 0.497511] thermal_sys: Registered thermal governor 'bang_bang' [ 0.497514] thermal_sys: Registered thermal governor 'step_wise' [ 0.497516] thermal_sys: Registered thermal governor 'user_space' [ 0.497518] thermal_sys: Registered thermal governor 'power_allocator' [ 0.497544] cpuidle: using governor ladder [ 0.497544] cpuidle: using governor menu [ 0.497544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.497744] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.497752] PCI: Intel Corporation E7520 Memory Controller Hub with ECAM support [ 0.497760] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.497785] PCI: Using configuration type 1 for base access [ 0.498003] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.505609] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.505609] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.511934] ACPI: Added _OSI(Module Device) [ 0.511934] ACPI: Added _OSI(Processor Device) [ 0.511934] ACPI: Added _OSI(Processor Aggregator Device) [ 0.516986] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.537482] ACPI: Interpreter enabled [ 0.537518] ACPI: PM: (supports S0 S4 S5) [ 0.537522] ACPI: Using IOAPIC for interrupt routing [ 0.538117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.538122] PCI: Using E820 reservations for host bridge windows [ 0.541164] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.553419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.553435] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.554322] PCI host bridge to bus 0000:00 [ 0.554331] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.554338] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.554342] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.554346] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 0.554351] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.554378] pci 0000:00:00.0: [8086:3590] type 00 class 0x060000 conventional PCI endpoint [ 0.554558] pci 0000:00:02.0: [8086:3595] type 01 class 0x060400 PCIe Root Port [ 0.554588] pci 0000:00:02.0: PCI bridge to [bus 01-03] [ 0.554595] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.554601] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfeafffff] [ 0.554612] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.554662] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.554869] pci 0000:00:04.0: [8086:3597] type 01 class 0x060400 PCIe Root Port [ 0.554898] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.554957] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.555172] pci 0000:00:05.0: [8086:3598] type 01 class 0x060400 PCIe Root Port [ 0.555201] pci 0000:00:05.0: PCI bridge to [bus 05-07] [ 0.555208] pci 0000:00:05.0: bridge window [io 0xc000-0xdfff] [ 0.555214] pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe7fffff] [ 0.555267] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.555473] pci 0000:00:06.0: [8086:3599] type 01 class 0x060400 PCIe Root Port [ 0.555502] pci 0000:00:06.0: PCI bridge to [bus 08] [ 0.555509] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 0.555514] pci 0000:00:06.0: bridge window [mem 0xfe100000-0xfe2fffff] [ 0.555569] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.555803] pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300 conventional PCI endpoint [ 0.555852] pci 0000:00:1d.0: BAR 4 [io 0x9ce0-0x9cff] [ 0.555978] pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300 conventional PCI endpoint [ 0.556030] pci 0000:00:1d.1: BAR 4 [io 0x9cc0-0x9cdf] [ 0.556146] pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300 conventional PCI endpoint [ 0.556195] pci 0000:00:1d.2: BAR 4 [io 0x9ca0-0x9cbf] [ 0.556314] pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320 conventional PCI endpoint [ 0.556336] pci 0000:00:1d.7: BAR 0 [mem 0xfeb00000-0xfeb003ff] [ 0.556432] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.556540] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400 conventional PCI bridge [ 0.556575] pci 0000:00:1e.0: PCI bridge to [bus 09] [ 0.556582] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.556588] pci 0000:00:1e.0: bridge window [mem 0xfdf00000-0xfe0fffff] [ 0.556595] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.556755] pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100 conventional PCI endpoint [ 0.556830] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO [ 0.556838] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO [ 0.557215] pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a conventional PCI endpoint [ 0.557235] pci 0000:00:1f.1: BAR 0 [io 0x0000-0x0007] [ 0.557246] pci 0000:00:1f.1: BAR 1 [io 0x0000-0x0003] [ 0.557257] pci 0000:00:1f.1: BAR 2 [io 0x0000-0x0007] [ 0.557268] pci 0000:00:1f.1: BAR 3 [io 0x0000-0x0003] [ 0.557279] pci 0000:00:1f.1: BAR 4 [io 0xfc00-0xfc0f] [ 0.557290] pci 0000:00:1f.1: BAR 5 [mem 0x00000000-0x000003ff] [ 0.557304] pci 0000:00:1f.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.557308] pci 0000:00:1f.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.557311] pci 0000:00:1f.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.557314] pci 0000:00:1f.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.557531] pci 0000:01:00.0: [8086:0330] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.557558] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.557565] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.557571] pci 0000:01:00.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.557582] pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.557637] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.557838] pci 0000:01:00.2: [8086:0332] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.557866] pci 0000:01:00.2: PCI bridge to [bus 03] [ 0.557931] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.558109] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.558133] pci 0000:00:02.0: PCI bridge to [bus 01-03] [ 0.558172] pci_bus 0000:02: extended config space not accessible [ 0.558230] pci 0000:02:05.0: [1000:0030] type 00 class 0x010000 conventional PCI endpoint [ 0.558249] pci 0000:02:05.0: BAR 0 [io 0xec00-0xecff] [ 0.558264] pci 0000:02:05.0: BAR 1 [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.558278] pci 0000:02:05.0: BAR 3 [mem 0xfe9e0000-0xfe9effff 64bit] [ 0.558295] pci 0000:02:05.0: ROM [mem 0xfea00000-0xfeafffff pref] [ 0.558339] pci 0000:02:05.0: supports D1 D2 [ 0.558433] pci 0000:02:05.1: [1000:0030] type 00 class 0x010000 conventional PCI endpoint [ 0.558451] pci 0000:02:05.1: BAR 0 [io 0xe800-0xe8ff] [ 0.558466] pci 0000:02:05.1: BAR 1 [mem 0xfe9d0000-0xfe9dffff 64bit] [ 0.558480] pci 0000:02:05.1: BAR 3 [mem 0xfe9c0000-0xfe9cffff 64bit] [ 0.558496] pci 0000:02:05.1: ROM [mem 0xfea00000-0xfeafffff pref] [ 0.558539] pci 0000:02:05.1: supports D1 D2 [ 0.558660] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.558700] pci_bus 0000:03: extended config space not accessible [ 0.558766] pci 0000:01:00.2: PCI bridge to [bus 03] [ 0.559092] acpiphp: Slot [2] registered [ 0.559136] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.559259] pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.559265] pci 0000:05:00.0: [8086:0329] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.559293] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.559300] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.559306] pci 0000:05:00.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.559369] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.559560] pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.559566] pci 0000:05:00.2: [8086:032a] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.559593] pci 0000:05:00.2: PCI bridge to [bus 07] [ 0.559600] pci 0000:05:00.2: bridge window [io 0xc000-0xcfff] [ 0.559606] pci 0000:05:00.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.559669] pci 0000:05:00.2: PME# supported from D0 D3hot D3cold [ 0.559871] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.559895] pci 0000:00:05.0: PCI bridge to [bus 05-07] [ 0.559934] pci_bus 0000:06: extended config space not accessible [ 0.559995] pci 0000:06:07.0: [8086:1076] type 00 class 0x020000 conventional PCI endpoint [ 0.560016] pci 0000:06:07.0: BAR 0 [mem 0xfe6e0000-0xfe6fffff] [ 0.560034] pci 0000:06:07.0: BAR 2 [io 0xdcc0-0xdcff] [ 0.560104] pci 0000:06:07.0: PME# supported from D0 D3hot D3cold [ 0.560222] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.560265] pci_bus 0000:07: extended config space not accessible [ 0.560325] pci 0000:07:08.0: [8086:1076] type 00 class 0x020000 conventional PCI endpoint [ 0.560346] pci 0000:07:08.0: BAR 0 [mem 0xfe4e0000-0xfe4fffff] [ 0.560364] pci 0000:07:08.0: BAR 2 [io 0xccc0-0xccff] [ 0.560434] pci 0000:07:08.0: PME# supported from D0 D3hot D3cold [ 0.560575] pci 0000:05:00.2: PCI bridge to [bus 07] [ 0.560908] acpiphp: Slot [3] registered [ 0.560988] pci 0000:08:00.0: [8086:f1a8] type 00 class 0x010802 PCIe Endpoint [ 0.561026] pci 0000:08:00.0: BAR 0 [mem 0xfe1fc000-0xfe1fffff 64bit] [ 0.561315] pci 0000:08:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.561456] pci 0000:00:06.0: PCI bridge to [bus 08] [ 0.561482] pci_bus 0000:09: extended config space not accessible [ 0.561562] pci 0000:09:0d.0: [1002:5159] type 00 class 0x030000 conventional PCI endpoint [ 0.561582] pci 0000:09:0d.0: BAR 0 [mem 0xf0000000-0xf7ffffff pref] [ 0.561595] pci 0000:09:0d.0: BAR 1 [io 0xac00-0xacff] [ 0.561606] pci 0000:09:0d.0: BAR 2 [mem 0xfdff0000-0xfdffffff] [ 0.561637] pci 0000:09:0d.0: ROM [mem 0x00000000-0x0001ffff pref] [ 0.561657] pci 0000:09:0d.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.561684] pci 0000:09:0d.0: supports D1 D2 [ 0.561834] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode) [ 0.561846] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.561851] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.561857] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.561861] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode) [ 0.564061] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.564167] ACPI: PCI: Interrupt link LNKB configured for IRQ 3 [ 0.564277] ACPI: PCI: Interrupt link LNKC configured for IRQ 7 [ 0.564387] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.564491] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.564495] ACPI: PCI: Interrupt link LNKE disabled [ 0.564598] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.564602] ACPI: PCI: Interrupt link LNKF disabled [ 0.564704] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.564707] ACPI: PCI: Interrupt link LNKG disabled [ 0.564807] ACPI: PCI: Interrupt link LNKH configured for IRQ 5 [ 0.565181] iommu: Default domain type: Translated [ 0.565181] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.565378] pps_core: LinuxPPS API ver. 1 registered [ 0.565382] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.565391] PTP clock support registered [ 0.565427] EDAC MC: Ver: 3.0.0 [ 0.565629] NetLabel: Initializing [ 0.565633] NetLabel: domain hash size = 128 [ 0.565636] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.565673] NetLabel: unlabeled traffic allowed by default [ 0.565676] PCI: Using ACPI for IRQ routing [ 0.574303] PCI: pci_cache_line_size set to 64 bytes [ 0.574374] e820: reserve RAM buffer [mem 0xdffc0000-0xdfffffff] [ 0.574380] e820: reserve RAM buffer [mem 0x1ffffe000-0x1ffffffff] [ 0.574421] pci 0000:09:0d.0: vgaarb: setting as boot VGA device [ 0.574421] pci 0000:09:0d.0: vgaarb: bridge control possible [ 0.574421] pci 0000:09:0d.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.574421] vgaarb: loaded [ 0.574421] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.574421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.574421] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.575291] clocksource: Switched to clocksource tsc-early [ 0.575974] VFS: Disk quotas dquot_6.6.0 [ 0.576037] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.576513] AppArmor: AppArmor Filesystem Enabled [ 0.576591] pnp: PnP ACPI init [ 0.577039] pnp 00:01: [dma 2] [ 0.579191] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.579199] system 00:05: [io 0x0880-0x08bf] has been reserved [ 0.579204] system 00:05: [io 0x08c0-0x08df] has been reserved [ 0.579209] system 00:05: [io 0x08e0-0x08e3] has been reserved [ 0.579213] system 00:05: [io 0x0c00-0x0c0f] has been reserved [ 0.579217] system 00:05: [io 0x0c10-0x0c1f] has been reserved [ 0.579222] system 00:05: [io 0x0ca0-0x0caf] could not be reserved [ 0.579226] system 00:05: [io 0x0c20-0x0c3f] has been reserved [ 0.579838] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.580096] pnp: PnP ACPI: found 7 devices [ 0.590480] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.590831] NET: Registered PF_INET protocol family [ 0.591352] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.613839] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.613930] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.614063] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.615002] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.615508] TCP: Hash tables configured (established 65536 bind 65536) [ 0.616051] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.616241] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.616375] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.616598] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.616639] NET: Registered PF_XDP protocol family [ 0.616663] pci 0000:02:05.1: ROM [mem 0xfea00000-0xfeafffff pref]: can't claim; address conflict with 0000:02:05.0 [mem 0xfea00000-0xfeafffff pref] [ 0.616721] pci 0000:00:1f.1: BAR 5 [mem 0xf9000000-0xf90003ff]: assigned [ 0.616736] pci 0000:02:05.1: ROM [mem 0xf8000000-0xf80fffff pref]: assigned [ 0.616742] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.616748] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.616755] pci 0000:01:00.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.616761] pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.616768] pci 0000:01:00.2: PCI bridge to [bus 03] [ 0.616779] pci 0000:00:02.0: PCI bridge to [bus 01-03] [ 0.616784] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.616790] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfeafffff] [ 0.616795] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.616803] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.616815] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.616819] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.616826] pci 0000:05:00.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.616835] pci 0000:05:00.2: PCI bridge to [bus 07] [ 0.616839] pci 0000:05:00.2: bridge window [io 0xc000-0xcfff] [ 0.616846] pci 0000:05:00.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.616855] pci 0000:00:05.0: PCI bridge to [bus 05-07] [ 0.616859] pci 0000:00:05.0: bridge window [io 0xc000-0xdfff] [ 0.616865] pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe7fffff] [ 0.616874] pci 0000:00:06.0: PCI bridge to [bus 08] [ 0.616878] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 0.616884] pci 0000:00:06.0: bridge window [mem 0xfe100000-0xfe2fffff] [ 0.616895] pci 0000:00:1e.0: PCI bridge to [bus 09] [ 0.616900] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.616907] pci 0000:00:1e.0: bridge window [mem 0xfdf00000-0xfe0fffff] [ 0.616912] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.616922] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.616926] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.616930] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.616934] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff window] [ 0.616938] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.616942] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfeafffff] [ 0.616946] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.616950] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.616954] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfeafffff] [ 0.616957] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.616961] pci_bus 0000:05: resource 0 [io 0xc000-0xdfff] [ 0.616965] pci_bus 0000:05: resource 1 [mem 0xfe300000-0xfe7fffff] [ 0.616969] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 0.616973] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.616977] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff] [ 0.616980] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.616984] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff] [ 0.616987] pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe2fffff] [ 0.616991] pci_bus 0000:09: resource 0 [io 0xa000-0xafff] [ 0.616995] pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfe0fffff] [ 0.616999] pci_bus 0000:09: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 0.617002] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7 window] [ 0.617006] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff window] [ 0.617010] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.617014] pci_bus 0000:09: resource 7 [mem 0xe0000000-0xfebfffff window] [ 0.617104] pci_bus 0000:01: writes to ASPM control bits will be ignored [ 0.617117] pci_bus 0000:05: writes to ASPM control bits will be ignored [ 0.617124] pci_bus 0000:08: writes to ASPM control bits will be ignored [ 0.618325] pci 0000:01:00.0: rerouting interrupts for [8086:0330] [ 0.618337] pci 0000:01:00.2: rerouting interrupts for [8086:0332] [ 0.618351] pci 0000:05:00.0: rerouting interrupts for [8086:0329] [ 0.618359] pci 0000:05:00.2: rerouting interrupts for [8086:032a] [ 0.618383] PCI: CLS 64 bytes, default 64 [ 0.618402] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.618406] software IO TLB: mapped [mem 0x00000000dbfc0000-0x00000000dffc0000] (64MB) [ 0.618635] Trying to unpack rootfs image as initramfs... [ 0.620070] Initialise system trusted keyrings [ 0.620118] Key type blacklist registered [ 0.620428] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.620474] zbud: loaded [ 0.621517] fuse: init (API version 7.41) [ 0.622390] integrity: Platform Keyring initialized [ 0.622417] integrity: Machine keyring initialized [ 0.660282] Key type asymmetric registered [ 0.660293] Asymmetric key parser 'x509' registered [ 1.002382] Freeing initrd memory: 50108K [ 1.016322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.016493] io scheduler mq-deadline registered [ 1.020253] ledtrig-cpu: registered to indicate activity on CPUs [ 1.021380] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.022414] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.022673] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.024694] Linux agpgart interface v0.103 [ 1.025702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.028296] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.028309] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.028659] mousedev: PS/2 mouse device common for all mice [ 1.028739] rtc_cmos 00:00: RTC can wake from S4 [ 1.029089] rtc_cmos 00:00: registered as rtc0 [ 1.029124] rtc_cmos 00:00: setting system clock to 2025-08-11T14:16:08 UTC (1754921768) [ 1.029210] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.029374] intel_pstate: CPU model not supported [ 1.030782] NET: Registered PF_INET6 protocol family [ 1.044097] Segment Routing with IPv6 [ 1.044131] In-situ OAM (IOAM) with IPv6 [ 1.044192] mip6: Mobile IPv6 [ 1.044202] NET: Registered PF_PACKET protocol family [ 1.044320] mpls_gso: MPLS GSO support [ 1.044900] microcode: Current revision: 0x00000005 [ 1.045115] IPI shorthand broadcast: enabled [ 1.050752] sched_clock: Marking stable (1041954076, 5387569)->(1071043337, -23701692) [ 1.051152] registered taskstats version 1 [ 1.051464] Loading compiled-in X.509 certificates [ 1.071036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.101205] Loaded X.509 cert 'Build time autogenerated kernel key: ba77a71e64c453bc15410391734927a088a45279' [ 1.107035] Demotion targets for Node 0: null [ 1.107510] Key type .fscrypt registered [ 1.107516] Key type fscrypt-provisioning registered [ 1.164984] Key type encrypted registered [ 1.164998] AppArmor: AppArmor sha256 policy hashing enabled [ 1.165028] ima: No TPM chip found, activating TPM-bypass! [ 1.165034] ima: Allocated hash algorithm: sha256 [ 1.165057] ima: No architecture policies found [ 1.165111] evm: Initialising EVM extended attributes: [ 1.165114] evm: security.selinux [ 1.165117] evm: security.SMACK64 (disabled) [ 1.165119] evm: security.SMACK64EXEC (disabled) [ 1.165121] evm: security.SMACK64TRANSMUTE (disabled) [ 1.165123] evm: security.SMACK64MMAP (disabled) [ 1.165125] evm: security.apparmor [ 1.165127] evm: security.ima [ 1.165129] evm: security.capability [ 1.165131] evm: HMAC attrs: 0x1 [ 1.170006] RAS: Correctable Errors collector initialized. [ 1.186129] clk: Disabling unused clocks [ 1.186140] PM: genpd: Disabling unused power domains [ 1.196097] Freeing unused decrypted memory: 2028K [ 1.199682] Freeing unused kernel image (initmem) memory: 4148K [ 1.206196] Write protecting the kernel read-only data: 28672k [ 1.207544] Freeing unused kernel image (rodata/data gap) memory: 500K [ 1.286751] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.286846] x86/mm: Checking user space page tables [ 1.356341] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.356372] Run /init as init process [ 1.356378] with arguments: [ 1.356382] /init [ 1.356387] with environment: [ 1.356390] HOME=/ [ 1.356394] TERM=linux [ 1.356397] BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 [ 1.633428] tsc: Refined TSC clocksource calibration: 3192.205 MHz [ 1.633455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0385f10f7, max_idle_ns: 440795224199 ns [ 1.633512] clocksource: Switched to clocksource tsc [ 1.811037] e1000: Intel(R) PRO/1000 Network Driver [ 1.811047] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.811249] e1000 0000:06:07.0: PCI IRQ 64 -> rerouted to legacy IRQ 16 [ 1.851617] ACPI: video: Video Device [EVGA] (multi-head: no rom: yes post: no) [ 1.851909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input3 [ 1.897713] ACPI: bus type USB registered [ 1.897870] usbcore: registered new interface driver usbfs [ 1.897916] usbcore: registered new interface driver hub [ 1.897968] usbcore: registered new device driver usb [ 1.909338] SCSI subsystem initialized [ 1.925246] iTCO_vendor_support: vendor-support=0 [ 1.941274] iTCO_wdt iTCO_wdt.1.auto: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 1.941959] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 1.951039] Fusion MPT base driver 3.04.20 [ 1.951048] Copyright (c) 1999-2008 LSI Corporation [ 1.956339] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.956363] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.956387] ehci-pci 0000:00:1d.7: debug port 1 [ 1.958478] nvme nvme0: pci function 0000:08:00.0 [ 1.960441] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeb00000 [ 1.964930] nvme nvme0: 8/0/0 default/read/poll queues [ 1.969456] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.969693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.969704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.969713] usb usb1: Product: EHCI Host Controller [ 1.969719] usb usb1: Manufacturer: Linux 6.12.38+deb13-amd64 ehci_hcd [ 1.969725] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.970218] hub 1-0:1.0: USB hub found [ 1.970250] hub 1-0:1.0: 6 ports detected [ 1.970405] nvme0n1: p1 p2 p3 p4 < p5 p6 p7 p8 > [ 2.009992] Fusion MPT SPI Host driver 3.04.20 [ 2.010330] mptspi 0000:02:05.0: PCI IRQ 34 -> rerouted to legacy IRQ 18 [ 2.010361] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.010388] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.010409] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.010687] uhci_hcd 0000:00:1d.0: irq 16, io port 0x00009ce0 [ 2.010984] mptbase: ioc0: Initiating bringup [ 2.011007] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.011018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.011023] usb usb2: Product: UHCI Host Controller [ 2.011027] usb usb2: Manufacturer: Linux 6.12.38+deb13-amd64 uhci_hcd [ 2.011031] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.011191] libata version 3.00 loaded. [ 2.012250] hub 2-0:1.0: USB hub found [ 2.012291] hub 2-0:1.0: 2 ports detected [ 2.013318] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.013334] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.013345] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.013450] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00009cc0 [ 2.013649] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.013657] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.013661] usb usb3: Product: UHCI Host Controller [ 2.013665] usb usb3: Manufacturer: Linux 6.12.38+deb13-amd64 uhci_hcd [ 2.013668] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.014053] hub 3-0:1.0: USB hub found [ 2.014086] hub 3-0:1.0: 2 ports detected [ 2.014730] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.014751] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.014766] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.014850] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00009ca0 [ 2.015062] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.015071] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.015075] usb usb4: Product: UHCI Host Controller [ 2.015079] usb usb4: Manufacturer: Linux 6.12.38+deb13-amd64 uhci_hcd [ 2.015083] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.015441] hub 4-0:1.0: USB hub found [ 2.015475] hub 4-0:1.0: 2 ports detected [ 2.024033] ata_piix 0000:00:1f.1: version 2.13 [ 2.024056] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.024244] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A [ 2.029918] scsi host0: ata_piix [ 2.031794] scsi host1: ata_piix [ 2.031906] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 lpm-pol 0 [ 2.031912] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 lpm-pol 0 [ 2.079801] e1000 0000:06:07.0 eth0: (PCI:66MHz:32-bit) 00:14:22:1c:80:16 [ 2.079822] e1000 0000:06:07.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.080023] e1000 0000:07:08.0: PCI IRQ 65 -> rerouted to legacy IRQ 17 [ 2.187970] ata1.00: ATAPI: TEAC CD-ROM CD-224E-N, 3.AB, max UDMA/33 [ 2.197486] scsi 0:0:0:0: CD-ROM TEAC CD-ROM CD-224E-N 3.AB PQ: 0 ANSI: 5 [ 2.225423] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 2.324140] e1000 0000:07:08.0 eth1: (PCI:66MHz:32-bit) 00:14:22:1c:80:17 [ 2.324161] e1000 0000:07:08.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.344460] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.344474] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.381821] usb 1-3: New USB device found, idVendor=413c, idProduct=a001, bcdDevice= 0.00 [ 2.381831] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.382307] hub 1-3:1.0: USB hub found [ 2.384564] hub 1-3:1.0: 2 ports detected [ 2.399095] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.525418] ioc0: LSI53C1030 C0: Capabilities={Initiator,Target} [ 2.635553] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.264241] scsi host2: ioc0: LSI53C1030 C0, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=18 [ 3.898839] mptspi 0000:02:05.1: PCI IRQ 33 -> rerouted to legacy IRQ 17 [ 3.899122] mptbase: ioc1: Initiating bringup [ 4.385407] ioc1: LSI53C1030 C0: Capabilities={Initiator,Target} [ 5.068165] scsi host3: ioc1: LSI53C1030 C0, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=17 [ 5.777586] scsi 2:0:0:0: Direct-Access COMPAQ BD3008A4C6 HPB4 PQ: 0 ANSI: 3 [ 5.801409] scsi target2:0:0: Beginning Domain Validation [ 5.816778] scsi 2:0:0:0: Power-on or device reset occurred [ 5.820218] scsi target2:0:0: Ending Domain Validation [ 5.820298] scsi target2:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.073535] scsi 2:0:2:0: Direct-Access COMPAQ BF3008B26C HPB9 PQ: 0 ANSI: 3 [ 6.109418] scsi target2:0:2: Beginning Domain Validation [ 6.118765] scsi 2:0:2:0: Power-on or device reset occurred [ 6.121381] scsi target2:0:2: Ending Domain Validation [ 6.121487] scsi target2:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 127) [ 6.132856] scsi 2:0:3:0: Direct-Access COMPAQ BD3008A4C6 HPB4 PQ: 0 ANSI: 3 [ 6.157410] scsi target2:0:3: Beginning Domain Validation [ 6.172829] scsi 2:0:3:0: Power-on or device reset occurred [ 6.176295] scsi target2:0:3: Ending Domain Validation [ 6.176376] scsi target2:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.186175] scsi 2:0:4:0: Direct-Access COMPAQ BD30088279 HPB2 PQ: 0 ANSI: 3 [ 6.209418] scsi target2:0:4: Beginning Domain Validation [ 6.224820] scsi 2:0:4:0: Power-on or device reset occurred [ 6.228267] scsi target2:0:4: Ending Domain Validation [ 6.228347] scsi target2:0:4: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.231302] scsi 2:0:5:0: Direct-Access COMPAQ BF3008B26C HPB9 PQ: 0 ANSI: 3 [ 6.253409] scsi target2:0:5: Beginning Domain Validation [ 6.262758] scsi 2:0:5:0: Power-on or device reset occurred [ 6.265356] scsi target2:0:5: Ending Domain Validation [ 6.265444] scsi target2:0:5: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 127) [ 6.282618] scsi 2:0:6:0: Processor PE/PV 1x6 SCSI BP 1.0 PQ: 0 ANSI: 2 [ 6.305411] scsi target2:0:6: Beginning Domain Validation [ 6.337309] scsi target2:0:6: Ending Domain Validation [ 6.337386] scsi target2:0:6: asynchronous [ 9.481381] sd 2:0:2:0: [sdb] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.481911] sd 2:0:5:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.482683] sd 2:0:2:0: [sdb] Write Protect is off [ 9.482692] sd 2:0:2:0: [sdb] Mode Sense: d3 00 10 08 [ 9.483129] sd 2:0:5:0: [sde] Write Protect is off [ 9.483137] sd 2:0:5:0: [sde] Mode Sense: d3 00 10 08 [ 9.484617] sd 2:0:2:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.485094] sd 2:0:5:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.485616] sd 2:0:4:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.487170] sd 2:0:4:0: [sdd] Write Protect is off [ 9.487179] sd 2:0:4:0: [sdd] Mode Sense: d3 00 10 08 [ 9.489175] sd 2:0:4:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.490299] sd 2:0:3:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.490866] sd 2:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.491870] sd 2:0:3:0: [sdc] Write Protect is off [ 9.491878] sd 2:0:3:0: [sdc] Mode Sense: d3 00 10 08 [ 9.492404] sd 2:0:0:0: [sda] Write Protect is off [ 9.492411] sd 2:0:0:0: [sda] Mode Sense: d3 00 10 08 [ 9.493871] sd 2:0:3:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.494425] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.517978] sd 2:0:2:0: [sdb] Attached SCSI disk [ 9.522439] sd 2:0:5:0: [sde] Attached SCSI disk [ 9.538981] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 > [ 9.539762] sd 2:0:4:0: [sdd] Attached SCSI disk [ 9.551592] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 9.552099] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 > [ 9.552415] sd 2:0:0:0: [sda] Attached SCSI disk [ 9.553116] sd 2:0:3:0: [sdc] Attached SCSI disk [ 10.308545] md: kicking non-fresh nvme0n1 from array! [ 10.354932] md/raid1:md127: active with 1 out of 4 mirrors [ 10.354982] md127: detected capacity change from 0 to 7810944 [ 10.377493] md/raid1:md2: active with 3 out of 5 mirrors [ 10.377554] md2: detected capacity change from 0 to 11710336 [ 10.405387] md/raid1:md1: active with 3 out of 5 mirrors [ 10.405475] md1: detected capacity change from 0 to 15615872 [ 10.486193] md/raid1:md0: active with 1 out of 2 mirrors [ 10.486249] md0: detected capacity change from 0 to 7806848 [ 10.569399] md/raid1:md4: active with 3 out of 4 mirrors [ 10.569468] md4: detected capacity change from 0 to 286599169 [ 11.245404] raid6: sse2x4 gen() 2969 MB/s [ 11.313404] raid6: sse2x2 gen() 2944 MB/s [ 11.381406] raid6: sse2x1 gen() 3138 MB/s [ 11.381410] raid6: using algorithm sse2x1 gen() 3138 MB/s [ 11.449401] raid6: .... xor() 2147 MB/s, rmw enabled [ 11.449406] raid6: using intx1 recovery algorithm [ 11.454684] xor: measuring software checksum speed [ 11.455102] prefetch64-sse : 8030 MB/sec [ 11.455518] generic_sse : 7995 MB/sec [ 11.455523] xor: using function: prefetch64-sse (8030 MB/sec) [ 11.459335] async_tx: api initialized (async) [ 12.140650] Btrfs loaded, zoned=yes, fsverity=yes [ 12.159266] random: crng init done [ 13.822787] EXT4-fs (md127): mounted filesystem 6836c18b-7345-4600-a6bc-cc0516e48aa0 ro with ordered data mode. Quota mode: none. [ 14.007048] EXT4-fs (md1): mounted filesystem 5e4bdd86-669e-4647-be9f-cdaf6f24755e ro with ordered data mode. Quota mode: none. [ 14.172971] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 15.496339] spl: loading out-of-tree module taints kernel. [ 15.496363] spl: module verification failed: signature and/or required key missing - tainting kernel [ 16.099129] zfs: module license 'CDDL' taints kernel. [ 16.099141] Disabling lock debugging due to kernel taint [ 16.099190] zfs: module license taints kernel. [ 19.168284] ZFS: Loaded module v2.3.2-2, ZFS pool version 5000, ZFS filesystem version 5 [ 27.061514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 27.081551] ACPI: button: Power Button [PWRF] [ 27.159601] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 27.182803] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden [ 27.210826] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 27.210975] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 27.211109] sd 2:0:2:0: Attached scsi generic sg2 type 0 [ 27.211222] sd 2:0:3:0: Attached scsi generic sg3 type 0 [ 27.211338] sd 2:0:4:0: Attached scsi generic sg4 type 0 [ 27.211461] sd 2:0:5:0: Attached scsi generic sg5 type 0 [ 27.211581] scsi 2:0:6:0: Attached scsi generic sg6 type 3 [ 27.283439] intel_rng: FWH not detected [ 27.400387] IPMI message handler: version 39.2 [ 27.457534] ipmi device interface [ 27.512998] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 27.569245] ipmi_si: IPMI System Interface driver [ 27.569295] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 27.569302] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 [ 27.569309] ipmi_si: Adding SMBIOS-specified kcs state machine [ 27.569792] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 27.739262] ACPI: bus type drm_connector registered [ 27.933814] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x0002a2, prod_id: 0x0000, dev_id: 0x20) [ 27.994731] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized [ 28.593354] [drm] radeon kernel modesetting enabled. [ 28.593602] radeon 0000:09:0d.0: vgaarb: deactivate vga console [ 28.594900] Console: switching to colour dummy device 80x25 [ 28.595197] [drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1028:0x016D 0x00). [ 28.595345] radeon 0000:09:0d.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (16M used) [ 28.595353] radeon 0000:09:0d.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF [ 28.595369] [drm] Detected VRAM RAM=128M, BAR=128M [ 28.595373] [drm] RAM width 32bits DDR [ 28.595666] [drm] radeon: 16M of VRAM memory ready [ 28.595674] [drm] radeon: 512M of GTT memory ready. [ 28.595708] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 28.617700] [drm] PCI GART of 512M enabled (table at 0x0000000001200000). [ 28.617755] radeon 0000:09:0d.0: WB disabled [ 28.617763] radeon 0000:09:0d.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 [ 28.618026] [drm] radeon: irq initialized. [ 28.618056] [drm] Loading R100 Microcode [ 28.645847] radeon 0000:09:0d.0: firmware: failed to load radeon/R100_cp.bin (-2) [ 28.645873] radeon 0000:09:0d.0: firmware: failed to load radeon/R100_cp.bin (-2) [ 28.645900] radeon 0000:09:0d.0: firmware: failed to load radeon/R100_cp.bin (-2) [ 28.645906] radeon 0000:09:0d.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 [ 28.645914] radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [ 28.645927] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware! [ 28.646178] radeon 0000:09:0d.0: failed initializing CP (-2). [ 28.646185] radeon 0000:09:0d.0: Disabling GPU acceleration [ 28.646195] [drm] radeon: cp finalized [ 28.647255] [drm] No TV DAC info found in BIOS [ 28.647278] [drm] Radeon Display Connectors [ 28.647283] [drm] Connector 0: [ 28.647286] [drm] VGA-1 [ 28.647290] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 28.647296] [drm] Encoders: [ 28.647299] [drm] CRT1: INTERNAL_DAC1 [ 28.647303] [drm] Connector 1: [ 28.647306] [drm] VGA-2 [ 28.647309] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 28.647315] [drm] Encoders: [ 28.647318] [drm] CRT2: INTERNAL_DAC2 [ 28.647322] [drm] Connector 2: [ 28.647327] [drm] DVI-I-1 [ 28.647331] [drm] HPD1 [ 28.647335] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 28.647341] [drm] Encoders: [ 28.647343] [drm] CRT2: INTERNAL_DAC2 [ 28.647347] [drm] DFP1: INTERNAL_TMDS1 [ 28.648052] [drm] Initialized radeon 2.50.0 for 0000:09:0d.0 on minor 0 [ 28.733025] radeon 0000:09:0d.0: [drm] format RG16 little-endian (0x36314752) not supported [ 28.733034] radeon 0000:09:0d.0: [drm] format RG16 little-endian (0x36314752) not supported [ 28.733039] radeon 0000:09:0d.0: [drm] No compatible format found [ 28.778982] [drm] fb mappable at 0xF0040000 [ 28.778988] [drm] vram apper at 0xF0000000 [ 28.778990] [drm] size 5242880 [ 28.778992] [drm] fb depth is 24 [ 28.778994] [drm] pitch is 5120 [ 28.779140] fbcon: radeondrmfb (fb0) is primary device [ 28.929224] Console: switching to colour frame buffer device 160x64 [ 28.975762] radeon 0000:09:0d.0: [drm] fb0: radeondrmfb frame buffer device [ 37.197204] [drm] amdgpu kernel modesetting enabled. [ 37.197597] amdgpu: Virtual CRAT table created for CPU [ 37.197648] amdgpu: Topology: Add CPU node [ 37.890217] EXT4-fs (md127): re-mounted 6836c18b-7345-4600-a6bc-cc0516e48aa0 r/w. [ 38.370618] loop: module loaded [ 38.684292] EXT4-fs (md1): re-mounted 5e4bdd86-669e-4647-be9f-cdaf6f24755e r/w. [ 38.703862] EXT4-fs (md2): mounted filesystem 2a4977b3-f249-4ce0-819f-44fab277e5cd r/w with ordered data mode. Quota mode: none. [ 39.644116] audit: type=1400 audit(1754921807.344:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=1504 comm="apparmor_parser" [ 39.644137] audit: type=1400 audit(1754921807.344:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=1506 comm="apparmor_parser" [ 39.644148] audit: type=1400 audit(1754921807.344:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=1505 comm="apparmor_parser" [ 39.644155] audit: type=1400 audit(1754921807.344:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=1503 comm="apparmor_parser" [ 39.656314] audit: type=1400 audit(1754921807.356:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=1524 comm="apparmor_parser" [ 39.656396] audit: type=1400 audit(1754921807.356:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=1521 comm="apparmor_parser" [ 39.656476] audit: type=1400 audit(1754921807.356:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=1522 comm="apparmor_parser" [ 39.663826] audit: type=1400 audit(1754921807.364:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=1527 comm="apparmor_parser" [ 39.664809] audit: type=1400 audit(1754921807.364:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=1526 comm="apparmor_parser" [ 39.664887] audit: type=1400 audit(1754921807.364:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=1529 comm="apparmor_parser" [ 41.515138] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 41.663311] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 41.811973] netfs: FS-Cache loaded [ 42.008126] RPC: Registered named UNIX socket transport module. [ 42.008137] RPC: Registered udp transport module. [ 42.008140] RPC: Registered tcp transport module. [ 42.008142] RPC: Registered tcp-with-tls transport module. [ 42.008144] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 45.529847] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 45.531811] NFSD: Using legacy client tracking operations. [ 45.531819] NFSD: starting 90-second grace period (net f0000000) [ 48.022445] nvme nvme0: using unchecked data buffer