[ 0.000000] Linux version 6.12.38+deb13-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.38-1 (2025-07-16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=6836c18b-7345-4600-a6bc-cc0516e48aa0 ro quiet vsyscall=emulate [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffbffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffcfbff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffcfc00-0x00000000dfffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000001ffffe000-0x00000001ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Dell Computer Corporation PowerEdge 2850/0T7971, BIOS A04 09/22/2005 [ 0.000000] DMI: Memory slots populated: 6/6 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.133 MHz processor [ 0.001932] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001939] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001952] last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.001964] MTRR map: 8 entries (5 fixed + 3 variable; max 21), built from 8 variable MTRRs [ 0.001968] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.002132] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.002141] last_pfn = 0xdffcf max_arch_pfn = 0x400000000 [ 0.017552] found SMP MP-table at [mem 0x000fe710-0x000fe71f] [ 0.018564] RAMDISK: [mem 0x31e11000-0x34efffff] [ 0.019201] ACPI: Early table checksum verification disabled [ 0.019209] ACPI: RSDP 0x00000000000FD5B0 000014 (v00 DELL ) [ 0.019220] ACPI: RSDT 0x00000000000FD5C4 000038 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019231] ACPI: FACP 0x00000000000FD620 000074 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019242] ACPI: DSDT 0x00000000DFFC0000 0038CA (v01 DELL PE BKC 00000001 MSFT 0100000E) [ 0.019250] ACPI: FACS 0x00000000DFFCFC00 000040 [ 0.019256] ACPI: APIC 0x00000000000FD694 0000D4 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019263] ACPI: SPCR 0x00000000000FD774 000050 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019270] ACPI: HPET 0x00000000000FD7C4 000038 (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019277] ACPI: MCFG 0x00000000000FD7FC 00003C (v01 DELL PE BKC 00000001 MSFT 0100000A) [ 0.019282] ACPI: Reserving FACP table memory at [mem 0xfd620-0xfd693] [ 0.019286] ACPI: Reserving DSDT table memory at [mem 0xdffc0000-0xdffc38c9] [ 0.019288] ACPI: Reserving FACS table memory at [mem 0xdffcfc00-0xdffcfc3f] [ 0.019290] ACPI: Reserving APIC table memory at [mem 0xfd694-0xfd767] [ 0.019293] ACPI: Reserving SPCR table memory at [mem 0xfd774-0xfd7c3] [ 0.019295] ACPI: Reserving HPET table memory at [mem 0xfd7c4-0xfd7fb] [ 0.019297] ACPI: Reserving MCFG table memory at [mem 0xfd7fc-0xfd837] [ 0.019479] No NUMA configuration found [ 0.019482] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.019501] NODE_DATA(0) allocated [mem 0x21ffd0680-0x21fffafff] [ 0.020110] Zone ranges: [ 0.020112] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020116] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020120] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.020123] Device empty [ 0.020125] Movable zone start for each node [ 0.020129] Early memory node ranges [ 0.020130] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.020133] node 0: [mem 0x0000000000100000-0x00000000dffbffff] [ 0.020136] node 0: [mem 0x0000000100000000-0x00000001ffffdfff] [ 0.020139] node 0: [mem 0x0000000200000000-0x000000021fffffff] [ 0.020142] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.020156] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.020265] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.055483] On node 0, zone Normal: 64 pages in unavailable ranges [ 0.055489] On node 0, zone Normal: 2 pages in unavailable ranges [ 0.055801] ACPI: PM-Timer IO Port: 0x808 [ 0.055827] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.055832] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.055834] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.055837] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.055839] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.055841] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.055843] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.055845] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.055858] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.055865] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55 [ 0.055872] IOAPIC[2]: apic_id 10, version 32, address 0xfec83000, GSI 64-87 [ 0.055876] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.055880] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.055889] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.055893] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.055903] ACPI: SPCR: SPCR table version 1 [ 0.055906] ACPI: SPCR: console: uart,io,0x3f8,9600 [ 0.055920] CPU topo: Max. logical packages: 4 [ 0.055922] CPU topo: Max. logical dies: 4 [ 0.055924] CPU topo: Max. dies per package: 1 [ 0.055935] CPU topo: Max. threads per core: 2 [ 0.055937] CPU topo: Num. cores per package: 1 [ 0.055940] CPU topo: Num. threads per package: 2 [ 0.055941] CPU topo: Allowing 4 present CPUs plus 4 hotplug CPUs [ 0.055969] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.055973] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.055976] PM: hibernation: Registered nosave memory: [mem 0xdffc0000-0xffffffff] [ 0.055979] PM: hibernation: Registered nosave memory: [mem 0x1ffffe000-0x1ffffffff] [ 0.055983] [mem 0xf0000000-0xfebfffff] available for PCI devices [ 0.055987] Booting paravirtualized kernel on bare hardware [ 0.055994] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.070912] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.073783] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.073803] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.073809] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.073852] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 root=UUID=6836c18b-7345-4600-a6bc-cc0516e48aa0 ro quiet vsyscall=emulate [ 0.073978] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64", will be passed to user space. [ 0.078779] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.081208] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.081489] Fallback order for Node 0: 0 [ 0.081502] Built 1 zonelists, mobility grouping on. Total pages: 2096989 [ 0.081506] Policy zone: Normal [ 0.081528] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.081542] software IO TLB: area num 8. [ 0.218330] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.218573] Kernel/User page tables isolation: enabled [ 0.218764] ftrace: allocating 45713 entries in 179 pages [ 0.232642] ftrace: allocated 179 pages with 5 groups [ 0.234217] Dynamic Preempt: voluntary [ 0.234562] rcu: Preemptible hierarchical RCU implementation. [ 0.234564] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.234567] Trampoline variant of Tasks RCU enabled. [ 0.234568] Rude variant of Tasks RCU enabled. [ 0.234569] Tracing variant of Tasks RCU enabled. [ 0.234571] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.234573] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.234608] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.234613] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.234618] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.248381] NR_IRQS: 524544, nr_irqs: 1576, preallocated irqs: 16 [ 0.248706] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.253479] Console: colour VGA+ 80x25 [ 0.253486] printk: legacy console [tty0] enabled [ 0.253873] ACPI: Core revision 20240827 [ 0.254089] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.254112] APIC: Switch to symmetric I/O mode setup [ 0.254660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.274113] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e03423a54d, max_idle_ns: 440795220803 ns [ 0.274129] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.26 BogoMIPS (lpj=12768532) [ 0.274173] CPU0: Thermal monitoring enabled (TM1) [ 0.274219] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 [ 0.274224] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.274231] process: using mwait in idle threads [ 0.274237] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.274243] Spectre V2 : Mitigation: Retpolines [ 0.274245] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.274248] Speculative Store Bypass: Vulnerable [ 0.274252] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.274255] MMIO Stale Data: Unknown: No mitigations [ 0.274261] x86/fpu: x87 FPU will use FXSAVE [ 0.313463] Freeing SMP alternatives memory: 40K [ 0.313490] pid_max: default: 32768 minimum: 301 [ 0.314599] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.315107] landlock: Up and running. [ 0.315110] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.315307] AppArmor: AppArmor initialized [ 0.315359] TOMOYO Linux initialized [ 0.315806] LSM support for eBPF active [ 0.316322] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.316385] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.425978] smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.20GHz (family: 0xf, model: 0x4, stepping: 0x3) [ 0.426120] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.426120] ... version: 0 [ 0.426120] ... bit width: 40 [ 0.426120] ... generic registers: 18 [ 0.426120] ... value mask: 000000ffffffffff [ 0.426120] ... max period: 0000007fffffffff [ 0.426120] ... fixed-purpose events: 0 [ 0.426120] ... event mask: 000000000003ffff [ 0.426120] signal: max sigframe size: 1440 [ 0.426120] rcu: Hierarchical SRCU implementation. [ 0.426120] rcu: Max phase no-delay instances is 1000. [ 0.426120] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.426120] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.426120] smp: Bringing up secondary CPUs ... [ 0.426120] smpboot: x86: Booting SMP configuration: [ 0.426120] .... node #0, CPUs: #1 #2 #3 [ 0.432124] Transient Scheduler Attacks: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.434318] smp: Brought up 1 node, 4 CPUs [ 0.434318] smpboot: Total of 4 processors activated (25537.06 BogoMIPS) [ 0.489161] node 0 deferred pages initialised in 52ms [ 0.489249] Memory: 8074248K/8387956K available (16384K kernel code, 2486K rwdata, 11788K rodata, 4148K init, 4952K bss, 307928K reserved, 0K cma-reserved) [ 0.490362] devtmpfs: initialized [ 0.490362] x86/mm: Memory block size: 128MB [ 0.494166] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.494255] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.494985] pinctrl core: initialized pinctrl subsystem [ 0.497966] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.499015] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.499515] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.500138] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.500190] audit: initializing netlink subsys (disabled) [ 0.500270] audit: type=2000 audit(1754920491.244:1): state=initialized audit_enabled=0 res=1 [ 0.500270] thermal_sys: Registered thermal governor 'fair_share' [ 0.500270] thermal_sys: Registered thermal governor 'bang_bang' [ 0.500270] thermal_sys: Registered thermal governor 'step_wise' [ 0.500270] thermal_sys: Registered thermal governor 'user_space' [ 0.500270] thermal_sys: Registered thermal governor 'power_allocator' [ 0.500270] cpuidle: using governor ladder [ 0.500270] cpuidle: using governor menu [ 0.500270] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.500270] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.500270] PCI: Intel Corporation E7520 Memory Controller Hub with ECAM support [ 0.500270] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.500270] PCI: Using configuration type 1 for base access [ 0.500270] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.506349] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.506349] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.510581] ACPI: Added _OSI(Module Device) [ 0.510588] ACPI: Added _OSI(Processor Device) [ 0.510591] ACPI: Added _OSI(Processor Aggregator Device) [ 0.515295] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.546562] ACPI: Interpreter enabled [ 0.546598] ACPI: PM: (supports S0 S4 S5) [ 0.546602] ACPI: Using IOAPIC for interrupt routing [ 0.547198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.547203] PCI: Using E820 reservations for host bridge windows [ 0.547405] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.560663] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.560680] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.561585] PCI host bridge to bus 0000:00 [ 0.561594] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.561600] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.561605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.561609] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 0.561614] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.561642] pci 0000:00:00.0: [8086:3590] type 00 class 0x060000 conventional PCI endpoint [ 0.561829] pci 0000:00:02.0: [8086:3595] type 01 class 0x060400 PCIe Root Port [ 0.561859] pci 0000:00:02.0: PCI bridge to [bus 01-03] [ 0.561866] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.561872] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfeafffff] [ 0.561883] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.561933] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.562156] pci 0000:00:04.0: [8086:3597] type 01 class 0x060400 PCIe Root Port [ 0.562186] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.562246] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.562451] pci 0000:00:05.0: [8086:3598] type 01 class 0x060400 PCIe Root Port [ 0.562481] pci 0000:00:05.0: PCI bridge to [bus 05-07] [ 0.562487] pci 0000:00:05.0: bridge window [io 0xc000-0xdfff] [ 0.562493] pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe7fffff] [ 0.562547] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.562744] pci 0000:00:06.0: [8086:3599] type 01 class 0x060400 PCIe Root Port [ 0.562773] pci 0000:00:06.0: PCI bridge to [bus 08] [ 0.562780] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 0.562786] pci 0000:00:06.0: bridge window [mem 0xfe100000-0xfe2fffff] [ 0.562840] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.563078] pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300 conventional PCI endpoint [ 0.563127] pci 0000:00:1d.0: BAR 4 [io 0x9ce0-0x9cff] [ 0.563236] pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300 conventional PCI endpoint [ 0.563285] pci 0000:00:1d.1: BAR 4 [io 0x9cc0-0x9cdf] [ 0.563398] pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300 conventional PCI endpoint [ 0.563446] pci 0000:00:1d.2: BAR 4 [io 0x9ca0-0x9cbf] [ 0.563571] pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320 conventional PCI endpoint [ 0.563594] pci 0000:00:1d.7: BAR 0 [mem 0xfeb00000-0xfeb003ff] [ 0.563690] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.563792] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400 conventional PCI bridge [ 0.563826] pci 0000:00:1e.0: PCI bridge to [bus 09] [ 0.563834] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.563840] pci 0000:00:1e.0: bridge window [mem 0xfdf00000-0xfe0fffff] [ 0.563847] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.564014] pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100 conventional PCI endpoint [ 0.564089] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO [ 0.564097] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO [ 0.564271] pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a conventional PCI endpoint [ 0.564291] pci 0000:00:1f.1: BAR 0 [io 0x0000-0x0007] [ 0.564304] pci 0000:00:1f.1: BAR 1 [io 0x0000-0x0003] [ 0.564314] pci 0000:00:1f.1: BAR 2 [io 0x0000-0x0007] [ 0.564325] pci 0000:00:1f.1: BAR 3 [io 0x0000-0x0003] [ 0.564336] pci 0000:00:1f.1: BAR 4 [io 0xfc00-0xfc0f] [ 0.564347] pci 0000:00:1f.1: BAR 5 [mem 0x00000000-0x000003ff] [ 0.564362] pci 0000:00:1f.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.564365] pci 0000:00:1f.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.564369] pci 0000:00:1f.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.564372] pci 0000:00:1f.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.564563] pci 0000:01:00.0: [8086:0330] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.564590] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.564597] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.564602] pci 0000:01:00.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.564613] pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.564667] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.564878] pci 0000:01:00.2: [8086:0332] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.564906] pci 0000:01:00.2: PCI bridge to [bus 03] [ 0.564971] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.565151] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.565175] pci 0000:00:02.0: PCI bridge to [bus 01-03] [ 0.565213] pci_bus 0000:02: extended config space not accessible [ 0.565265] pci 0000:02:05.0: [1000:0030] type 00 class 0x010000 conventional PCI endpoint [ 0.565287] pci 0000:02:05.0: BAR 0 [io 0xec00-0xecff] [ 0.565303] pci 0000:02:05.0: BAR 1 [mem 0xfe9f0000-0xfe9fffff 64bit] [ 0.565318] pci 0000:02:05.0: BAR 3 [mem 0xfe9e0000-0xfe9effff 64bit] [ 0.565335] pci 0000:02:05.0: ROM [mem 0xfea00000-0xfeafffff pref] [ 0.565379] pci 0000:02:05.0: supports D1 D2 [ 0.565479] pci 0000:02:05.1: [1000:0030] type 00 class 0x010000 conventional PCI endpoint [ 0.565498] pci 0000:02:05.1: BAR 0 [io 0xe800-0xe8ff] [ 0.565513] pci 0000:02:05.1: BAR 1 [mem 0xfe9d0000-0xfe9dffff 64bit] [ 0.565527] pci 0000:02:05.1: BAR 3 [mem 0xfe9c0000-0xfe9cffff 64bit] [ 0.565543] pci 0000:02:05.1: ROM [mem 0xfea00000-0xfeafffff pref] [ 0.565586] pci 0000:02:05.1: supports D1 D2 [ 0.565698] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.565738] pci_bus 0000:03: extended config space not accessible [ 0.565816] pci 0000:01:00.2: PCI bridge to [bus 03] [ 0.566155] acpiphp: Slot [2] registered [ 0.566200] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.566317] pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled [ 0.566323] pci 0000:05:00.0: [8086:0329] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.566351] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.566357] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.566363] pci 0000:05:00.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.566426] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.566636] pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled [ 0.566641] pci 0000:05:00.2: [8086:032a] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.566669] pci 0000:05:00.2: PCI bridge to [bus 07] [ 0.566676] pci 0000:05:00.2: bridge window [io 0xc000-0xcfff] [ 0.566681] pci 0000:05:00.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.566744] pci 0000:05:00.2: PME# supported from D0 D3hot D3cold [ 0.566944] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.566967] pci 0000:00:05.0: PCI bridge to [bus 05-07] [ 0.567007] pci_bus 0000:06: extended config space not accessible [ 0.567061] pci 0000:06:07.0: [8086:1076] type 00 class 0x020000 conventional PCI endpoint [ 0.567081] pci 0000:06:07.0: BAR 0 [mem 0xfe6e0000-0xfe6fffff] [ 0.567099] pci 0000:06:07.0: BAR 2 [io 0xdcc0-0xdcff] [ 0.567169] pci 0000:06:07.0: PME# supported from D0 D3hot D3cold [ 0.567291] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.567333] pci_bus 0000:07: extended config space not accessible [ 0.567386] pci 0000:07:08.0: [8086:1076] type 00 class 0x020000 conventional PCI endpoint [ 0.567407] pci 0000:07:08.0: BAR 0 [mem 0xfe4e0000-0xfe4fffff] [ 0.567425] pci 0000:07:08.0: BAR 2 [io 0xccc0-0xccff] [ 0.567495] pci 0000:07:08.0: PME# supported from D0 D3hot D3cold [ 0.567616] pci 0000:05:00.2: PCI bridge to [bus 07] [ 0.567940] acpiphp: Slot [3] registered [ 0.568019] pci 0000:08:00.0: [8086:f1a8] type 00 class 0x010802 PCIe Endpoint [ 0.568057] pci 0000:08:00.0: BAR 0 [mem 0xfe1fc000-0xfe1fffff 64bit] [ 0.568337] pci 0000:08:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.568500] pci 0000:00:06.0: PCI bridge to [bus 08] [ 0.568526] pci_bus 0000:09: extended config space not accessible [ 0.568599] pci 0000:09:0d.0: [1002:5159] type 00 class 0x030000 conventional PCI endpoint [ 0.568619] pci 0000:09:0d.0: BAR 0 [mem 0xf0000000-0xf7ffffff pref] [ 0.568630] pci 0000:09:0d.0: BAR 1 [io 0xac00-0xacff] [ 0.568641] pci 0000:09:0d.0: BAR 2 [mem 0xfdff0000-0xfdffffff] [ 0.568673] pci 0000:09:0d.0: ROM [mem 0x00000000-0x0001ffff pref] [ 0.568692] pci 0000:09:0d.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.568719] pci 0000:09:0d.0: supports D1 D2 [ 0.568869] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode) [ 0.568881] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.568886] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.568890] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.568894] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode) [ 0.571008] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.571115] ACPI: PCI: Interrupt link LNKB configured for IRQ 3 [ 0.571218] ACPI: PCI: Interrupt link LNKC configured for IRQ 7 [ 0.571319] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.571422] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.571426] ACPI: PCI: Interrupt link LNKE disabled [ 0.571529] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.571533] ACPI: PCI: Interrupt link LNKF disabled [ 0.571634] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.571638] ACPI: PCI: Interrupt link LNKG disabled [ 0.571738] ACPI: PCI: Interrupt link LNKH configured for IRQ 5 [ 0.572074] iommu: Default domain type: Translated [ 0.572074] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.572074] pps_core: LinuxPPS API ver. 1 registered [ 0.572074] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.572074] PTP clock support registered [ 0.572074] EDAC MC: Ver: 3.0.0 [ 0.572074] NetLabel: Initializing [ 0.572074] NetLabel: domain hash size = 128 [ 0.572074] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.572074] NetLabel: unlabeled traffic allowed by default [ 0.572074] PCI: Using ACPI for IRQ routing [ 0.578474] PCI: pci_cache_line_size set to 64 bytes [ 0.578546] e820: reserve RAM buffer [mem 0xdffc0000-0xdfffffff] [ 0.578551] e820: reserve RAM buffer [mem 0x1ffffe000-0x1ffffffff] [ 0.578601] pci 0000:09:0d.0: vgaarb: setting as boot VGA device [ 0.578601] pci 0000:09:0d.0: vgaarb: bridge control possible [ 0.578601] pci 0000:09:0d.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.578601] vgaarb: loaded [ 0.578601] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.578601] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.578601] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.582127] clocksource: Switched to clocksource tsc-early [ 0.585083] VFS: Disk quotas dquot_6.6.0 [ 0.585145] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.585598] AppArmor: AppArmor Filesystem Enabled [ 0.585658] pnp: PnP ACPI init [ 0.586154] pnp 00:01: [dma 2] [ 0.588295] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.588303] system 00:05: [io 0x0880-0x08bf] has been reserved [ 0.588308] system 00:05: [io 0x08c0-0x08df] has been reserved [ 0.588313] system 00:05: [io 0x08e0-0x08e3] has been reserved [ 0.588317] system 00:05: [io 0x0c00-0x0c0f] has been reserved [ 0.588322] system 00:05: [io 0x0c10-0x0c1f] has been reserved [ 0.588327] system 00:05: [io 0x0ca0-0x0caf] could not be reserved [ 0.588331] system 00:05: [io 0x0c20-0x0c3f] has been reserved [ 0.588936] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.589192] pnp: PnP ACPI: found 7 devices [ 0.599520] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.599882] NET: Registered PF_INET protocol family [ 0.600412] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.622874] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.622965] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.623097] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.624116] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.624679] TCP: Hash tables configured (established 65536 bind 65536) [ 0.625341] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.625527] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.625659] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.625893] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.625915] NET: Registered PF_XDP protocol family [ 0.625929] pci 0000:02:05.1: ROM [mem 0xfea00000-0xfeafffff pref]: can't claim; address conflict with 0000:02:05.0 [mem 0xfea00000-0xfeafffff pref] [ 0.625980] pci 0000:00:1f.1: BAR 5 [mem 0xf9000000-0xf90003ff]: assigned [ 0.625995] pci 0000:02:05.1: ROM [mem 0xf8000000-0xf80fffff pref]: assigned [ 0.626001] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.626006] pci 0000:01:00.0: bridge window [io 0xe000-0xefff] [ 0.626013] pci 0000:01:00.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.626019] pci 0000:01:00.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.626027] pci 0000:01:00.2: PCI bridge to [bus 03] [ 0.626037] pci 0000:00:02.0: PCI bridge to [bus 01-03] [ 0.626042] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.626048] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfeafffff] [ 0.626054] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.626062] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.626074] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.626078] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.626084] pci 0000:05:00.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.626093] pci 0000:05:00.2: PCI bridge to [bus 07] [ 0.626098] pci 0000:05:00.2: bridge window [io 0xc000-0xcfff] [ 0.626104] pci 0000:05:00.2: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.626113] pci 0000:00:05.0: PCI bridge to [bus 05-07] [ 0.626117] pci 0000:00:05.0: bridge window [io 0xc000-0xdfff] [ 0.626123] pci 0000:00:05.0: bridge window [mem 0xfe300000-0xfe7fffff] [ 0.626133] pci 0000:00:06.0: PCI bridge to [bus 08] [ 0.626137] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 0.626143] pci 0000:00:06.0: bridge window [mem 0xfe100000-0xfe2fffff] [ 0.626154] pci 0000:00:1e.0: PCI bridge to [bus 09] [ 0.626159] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.626165] pci 0000:00:1e.0: bridge window [mem 0xfdf00000-0xfe0fffff] [ 0.626171] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.626181] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.626185] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.626189] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.626193] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff window] [ 0.626197] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.626201] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfeafffff] [ 0.626205] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.626209] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.626212] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfeafffff] [ 0.626216] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf8ffffff 64bit pref] [ 0.626220] pci_bus 0000:05: resource 0 [io 0xc000-0xdfff] [ 0.626224] pci_bus 0000:05: resource 1 [mem 0xfe300000-0xfe7fffff] [ 0.626228] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 0.626232] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.626236] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff] [ 0.626240] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.626244] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff] [ 0.626247] pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe2fffff] [ 0.626251] pci_bus 0000:09: resource 0 [io 0xa000-0xafff] [ 0.626255] pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfe0fffff] [ 0.626259] pci_bus 0000:09: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 0.626263] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7 window] [ 0.626266] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff window] [ 0.626270] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.626274] pci_bus 0000:09: resource 7 [mem 0xe0000000-0xfebfffff window] [ 0.626363] pci_bus 0000:01: writes to ASPM control bits will be ignored [ 0.626376] pci_bus 0000:05: writes to ASPM control bits will be ignored [ 0.626383] pci_bus 0000:08: writes to ASPM control bits will be ignored [ 0.627390] pci 0000:01:00.0: rerouting interrupts for [8086:0330] [ 0.627402] pci 0000:01:00.2: rerouting interrupts for [8086:0332] [ 0.627415] pci 0000:05:00.0: rerouting interrupts for [8086:0329] [ 0.627425] pci 0000:05:00.2: rerouting interrupts for [8086:032a] [ 0.627448] PCI: CLS 64 bytes, default 64 [ 0.627472] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.627477] software IO TLB: mapped [mem 0x00000000dbfc0000-0x00000000dffc0000] (64MB) [ 0.627741] Trying to unpack rootfs image as initramfs... [ 0.629241] Initialise system trusted keyrings [ 0.629304] Key type blacklist registered [ 0.629486] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.629525] zbud: loaded [ 0.630560] fuse: init (API version 7.41) [ 0.631384] integrity: Platform Keyring initialized [ 0.631422] integrity: Machine keyring initialized [ 0.697226] Key type asymmetric registered [ 0.697241] Asymmetric key parser 'x509' registered [ 1.021658] Freeing initrd memory: 50108K [ 1.034964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.035090] io scheduler mq-deadline registered [ 1.038492] ledtrig-cpu: registered to indicate activity on CPUs [ 1.039530] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.040691] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.040940] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.042883] Linux agpgart interface v0.103 [ 1.043887] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.046655] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.046669] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.047017] mousedev: PS/2 mouse device common for all mice [ 1.047095] rtc_cmos 00:00: RTC can wake from S4 [ 1.047444] rtc_cmos 00:00: registered as rtc0 [ 1.047473] rtc_cmos 00:00: setting system clock to 2025-08-11T13:54:52 UTC (1754920492) [ 1.047537] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.047693] intel_pstate: CPU model not supported [ 1.049112] NET: Registered PF_INET6 protocol family [ 1.062445] Segment Routing with IPv6 [ 1.062494] In-situ OAM (IOAM) with IPv6 [ 1.062536] mip6: Mobile IPv6 [ 1.062545] NET: Registered PF_PACKET protocol family [ 1.062667] mpls_gso: MPLS GSO support [ 1.063249] microcode: Current revision: 0x00000005 [ 1.063464] IPI shorthand broadcast: enabled [ 1.069138] sched_clock: Marking stable (1062644829, 5390212)->(1089916546, -21881505) [ 1.069541] registered taskstats version 1 [ 1.069844] Loading compiled-in X.509 certificates [ 1.087621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.118506] Loaded X.509 cert 'Build time autogenerated kernel key: ba77a71e64c453bc15410391734927a088a45279' [ 1.124236] Demotion targets for Node 0: null [ 1.124712] Key type .fscrypt registered [ 1.124716] Key type fscrypt-provisioning registered [ 1.182793] Key type encrypted registered [ 1.182812] AppArmor: AppArmor sha256 policy hashing enabled [ 1.182861] ima: No TPM chip found, activating TPM-bypass! [ 1.182872] ima: Allocated hash algorithm: sha256 [ 1.182895] ima: No architecture policies found [ 1.182936] evm: Initialising EVM extended attributes: [ 1.182938] evm: security.selinux [ 1.182941] evm: security.SMACK64 (disabled) [ 1.182944] evm: security.SMACK64EXEC (disabled) [ 1.182946] evm: security.SMACK64TRANSMUTE (disabled) [ 1.182948] evm: security.SMACK64MMAP (disabled) [ 1.182950] evm: security.apparmor [ 1.182952] evm: security.ima [ 1.182954] evm: security.capability [ 1.182956] evm: HMAC attrs: 0x1 [ 1.186714] RAS: Correctable Errors collector initialized. [ 1.210744] clk: Disabling unused clocks [ 1.210755] PM: genpd: Disabling unused power domains [ 1.221716] Freeing unused decrypted memory: 2028K [ 1.225709] Freeing unused kernel image (initmem) memory: 4148K [ 1.225880] Write protecting the kernel read-only data: 28672k [ 1.226745] Freeing unused kernel image (rodata/data gap) memory: 500K [ 1.304330] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.304411] x86/mm: Checking user space page tables [ 1.373785] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.373798] Run /init as init process [ 1.373801] with arguments: [ 1.373805] /init [ 1.373808] with environment: [ 1.373810] HOME=/ [ 1.373812] TERM=linux [ 1.373815] BOOT_IMAGE=/boot/vmlinuz-6.12.38+deb13-amd64 [ 1.637428] tsc: Refined TSC clocksource calibration: 3192.205 MHz [ 1.637450] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0385f10f7, max_idle_ns: 440795224199 ns [ 1.637503] clocksource: Switched to clocksource tsc [ 1.832513] e1000: Intel(R) PRO/1000 Network Driver [ 1.832524] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.832707] e1000 0000:06:07.0: PCI IRQ 64 -> rerouted to legacy IRQ 16 [ 1.867437] ACPI: bus type USB registered [ 1.867546] usbcore: registered new interface driver usbfs [ 1.867581] usbcore: registered new interface driver hub [ 1.867647] usbcore: registered new device driver usb [ 1.877603] ACPI: video: Video Device [EVGA] (multi-head: no rom: yes post: no) [ 1.877942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input3 [ 1.904828] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.904857] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.904906] ehci-pci 0000:00:1d.7: debug port 1 [ 1.908899] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeb00000 [ 1.917434] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.917611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 1.917620] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.917626] usb usb1: Product: EHCI Host Controller [ 1.917631] usb usb1: Manufacturer: Linux 6.12.38+deb13-amd64 ehci_hcd [ 1.917637] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.918046] hub 1-0:1.0: USB hub found [ 1.918070] hub 1-0:1.0: 6 ports detected [ 1.929209] SCSI subsystem initialized [ 1.948395] iTCO_vendor_support: vendor-support=0 [ 1.960872] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.960898] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.960914] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.961006] uhci_hcd 0000:00:1d.0: irq 16, io port 0x00009ce0 [ 1.961209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.961218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.961226] usb usb2: Product: UHCI Host Controller [ 1.961231] usb usb2: Manufacturer: Linux 6.12.38+deb13-amd64 uhci_hcd [ 1.961237] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.962745] hub 2-0:1.0: USB hub found [ 1.962800] hub 2-0:1.0: 2 ports detected [ 1.963480] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.963497] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.963509] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.963599] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00009cc0 [ 1.963773] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.963782] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.963788] usb usb3: Product: UHCI Host Controller [ 1.963795] usb usb3: Manufacturer: Linux 6.12.38+deb13-amd64 uhci_hcd [ 1.963800] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.964126] hub 3-0:1.0: USB hub found [ 1.964151] hub 3-0:1.0: 2 ports detected [ 1.964793] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.964808] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.964821] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.964887] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00009ca0 [ 1.965080] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 1.965089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.965095] usb usb4: Product: UHCI Host Controller [ 1.965101] usb usb4: Manufacturer: Linux 6.12.38+deb13-amd64 uhci_hcd [ 1.965106] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.965452] hub 4-0:1.0: USB hub found [ 1.965492] hub 4-0:1.0: 2 ports detected [ 1.970374] iTCO_wdt iTCO_wdt.1.auto: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 1.970903] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 1.982560] Fusion MPT base driver 3.04.20 [ 1.982570] Copyright (c) 1999-2008 LSI Corporation [ 1.993768] nvme nvme0: pci function 0000:08:00.0 [ 2.002056] nvme nvme0: 8/0/0 default/read/poll queues [ 2.011800] nvme0n1: p1 p2 p3 p4 < p5 p6 p7 p8 > [ 2.028946] libata version 3.00 loaded. [ 2.037646] Fusion MPT SPI Host driver 3.04.20 [ 2.037877] mptspi 0000:02:05.0: PCI IRQ 34 -> rerouted to legacy IRQ 18 [ 2.038152] mptbase: ioc0: Initiating bringup [ 2.039466] ata_piix 0000:00:1f.1: version 2.13 [ 2.039488] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.039680] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A [ 2.040941] scsi host0: ata_piix [ 2.041847] scsi host1: ata_piix [ 2.042947] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 lpm-pol 0 [ 2.042957] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 lpm-pol 0 [ 2.111772] e1000 0000:06:07.0 eth0: (PCI:66MHz:32-bit) 00:14:22:1c:80:16 [ 2.111794] e1000 0000:06:07.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.112003] e1000 0000:07:08.0: PCI IRQ 65 -> rerouted to legacy IRQ 17 [ 2.169733] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 2.200034] ata1.00: ATAPI: TEAC CD-ROM CD-224E-N, 3.AB, max UDMA/33 [ 2.209491] scsi 0:0:0:0: CD-ROM TEAC CD-ROM CD-224E-N 3.AB PQ: 0 ANSI: 5 [ 2.317941] usb 1-3: New USB device found, idVendor=413c, idProduct=a001, bcdDevice= 0.00 [ 2.317959] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.318548] hub 1-3:1.0: USB hub found [ 2.321455] hub 1-3:1.0: 2 ports detected [ 2.355742] e1000 0000:07:08.0 eth1: (PCI:66MHz:32-bit) 00:14:22:1c:80:17 [ 2.355762] e1000 0000:07:08.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.366244] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.366256] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.431125] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.557415] ioc0: LSI53C1030 C0: Capabilities={Initiator,Target} [ 2.698988] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.252213] scsi host2: ioc0: LSI53C1030 C0, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=18 [ 3.886874] mptspi 0000:02:05.1: PCI IRQ 33 -> rerouted to legacy IRQ 17 [ 3.887173] mptbase: ioc1: Initiating bringup [ 4.373410] ioc1: LSI53C1030 C0: Capabilities={Initiator,Target} [ 5.056165] scsi host3: ioc1: LSI53C1030 C0, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=17 [ 5.056944] scsi 2:0:0:0: Direct-Access COMPAQ BD3008A4C6 HPB4 PQ: 0 ANSI: 3 [ 5.069424] scsi target2:0:0: Beginning Domain Validation [ 5.779820] scsi 2:0:0:0: Power-on or device reset occurred [ 5.783265] scsi target2:0:0: Ending Domain Validation [ 5.783346] scsi target2:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.036569] scsi 2:0:2:0: Direct-Access COMPAQ BF3008B26C HPB9 PQ: 0 ANSI: 3 [ 6.049411] scsi target2:0:2: Beginning Domain Validation [ 6.058752] scsi 2:0:2:0: Power-on or device reset occurred [ 6.061354] scsi target2:0:2: Ending Domain Validation [ 6.061441] scsi target2:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 127) [ 6.066489] scsi 2:0:3:0: Direct-Access COMPAQ BD3008A4C6 HPB4 PQ: 0 ANSI: 3 [ 6.085416] scsi target2:0:3: Beginning Domain Validation [ 6.100827] scsi 2:0:3:0: Power-on or device reset occurred [ 6.104284] scsi target2:0:3: Ending Domain Validation [ 6.104365] scsi target2:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.113072] scsi 2:0:4:0: Direct-Access COMPAQ BD30088279 HPB2 PQ: 0 ANSI: 3 [ 6.133414] scsi target2:0:4: Beginning Domain Validation [ 6.148778] scsi 2:0:4:0: Power-on or device reset occurred [ 6.152211] scsi target2:0:4: Ending Domain Validation [ 6.152292] scsi target2:0:4: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.155236] scsi 2:0:5:0: Direct-Access COMPAQ BF3008B26C HPB9 PQ: 0 ANSI: 3 [ 6.169415] scsi target2:0:5: Beginning Domain Validation [ 6.178737] scsi 2:0:5:0: Power-on or device reset occurred [ 6.181344] scsi target2:0:5: Ending Domain Validation [ 6.181434] scsi target2:0:5: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 127) [ 6.196869] scsi 2:0:6:0: Processor PE/PV 1x6 SCSI BP 1.0 PQ: 0 ANSI: 2 [ 6.213416] scsi target2:0:6: Beginning Domain Validation [ 6.246324] scsi target2:0:6: Ending Domain Validation [ 6.246402] scsi target2:0:6: asynchronous [ 9.471805] sd 2:0:2:0: [sdb] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.471954] sd 2:0:5:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.472540] sd 2:0:3:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.473023] sd 2:0:2:0: [sdb] Write Protect is off [ 9.473030] sd 2:0:2:0: [sdb] Mode Sense: d3 00 10 08 [ 9.473171] sd 2:0:5:0: [sde] Write Protect is off [ 9.473177] sd 2:0:5:0: [sde] Mode Sense: d3 00 10 08 [ 9.474071] sd 2:0:3:0: [sdc] Write Protect is off [ 9.474078] sd 2:0:3:0: [sdc] Mode Sense: d3 00 10 08 [ 9.474961] sd 2:0:2:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.475190] sd 2:0:5:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.476148] sd 2:0:3:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.476289] sd 2:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.477833] sd 2:0:0:0: [sda] Write Protect is off [ 9.477844] sd 2:0:0:0: [sda] Mode Sense: d3 00 10 08 [ 9.479918] sd 2:0:4:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 9.479963] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.481497] sd 2:0:4:0: [sdd] Write Protect is off [ 9.481508] sd 2:0:4:0: [sdd] Mode Sense: d3 00 10 08 [ 9.483528] sd 2:0:4:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 9.503885] sd 2:0:2:0: [sdb] Attached SCSI disk [ 9.503996] sd 2:0:5:0: [sde] Attached SCSI disk [ 9.523615] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 9.523684] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 > [ 9.524720] sd 2:0:0:0: [sda] Attached SCSI disk [ 9.524725] sd 2:0:3:0: [sdc] Attached SCSI disk [ 9.535069] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 > [ 9.535710] sd 2:0:4:0: [sdd] Attached SCSI disk [ 10.002955] md/raid1:md0: active with 1 out of 2 mirrors [ 10.003007] md0: detected capacity change from 0 to 7806848 [ 10.267151] md/raid1:md2: active with 3 out of 5 mirrors [ 10.267211] md2: detected capacity change from 0 to 11710336 [ 10.364503] md: kicking non-fresh nvme0n1 from array! [ 10.391419] md/raid1:md127: active with 1 out of 4 mirrors [ 10.391467] md127: detected capacity change from 0 to 7810944 [ 10.416551] md/raid1:md4: active with 3 out of 4 mirrors [ 10.416603] md4: detected capacity change from 0 to 286599169 [ 10.460117] md/raid1:md1: active with 3 out of 5 mirrors [ 10.460167] md1: detected capacity change from 0 to 15615872 [ 10.881406] raid6: sse2x4 gen() 2968 MB/s [ 10.949404] raid6: sse2x2 gen() 2939 MB/s [ 11.017411] raid6: sse2x1 gen() 3140 MB/s [ 11.017415] raid6: using algorithm sse2x1 gen() 3140 MB/s [ 11.085401] raid6: .... xor() 2162 MB/s, rmw enabled [ 11.085408] raid6: using intx1 recovery algorithm [ 11.090107] xor: measuring software checksum speed [ 11.090529] prefetch64-sse : 7963 MB/sec [ 11.090952] generic_sse : 7860 MB/sec [ 11.090956] xor: using function: prefetch64-sse (7963 MB/sec) [ 11.094596] async_tx: api initialized (async) [ 11.760912] Btrfs loaded, zoned=yes, fsverity=yes [ 11.781426] random: crng init done [ 13.338529] EXT4-fs (md127): mounted filesystem 6836c18b-7345-4600-a6bc-cc0516e48aa0 ro with ordered data mode. Quota mode: none. [ 13.523819] EXT4-fs (md1): mounted filesystem 5e4bdd86-669e-4647-be9f-cdaf6f24755e ro with ordered data mode. Quota mode: none. [ 13.683930] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 14.995328] spl: loading out-of-tree module taints kernel. [ 14.995351] spl: module verification failed: signature and/or required key missing - tainting kernel [ 15.598083] zfs: module license 'CDDL' taints kernel. [ 15.598096] Disabling lock debugging due to kernel taint [ 15.598143] zfs: module license taints kernel. [ 18.675357] ZFS: Loaded module v2.3.2-2, ZFS pool version 5000, ZFS filesystem version 5 [ 29.283887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 29.297527] ACPI: button: Power Button [PWRF] [ 29.373676] IPMI message handler: version 39.2 [ 29.379257] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 29.412817] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden [ 29.467377] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 29.467498] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 29.467626] sd 2:0:2:0: Attached scsi generic sg2 type 0 [ 29.467733] sd 2:0:3:0: Attached scsi generic sg3 type 0 [ 29.467854] sd 2:0:4:0: Attached scsi generic sg4 type 0 [ 29.467968] sd 2:0:5:0: Attached scsi generic sg5 type 0 [ 29.468083] scsi 2:0:6:0: Attached scsi generic sg6 type 3 [ 29.531101] intel_rng: FWH not detected [ 29.568987] ipmi device interface [ 29.623822] ipmi_si: IPMI System Interface driver [ 29.623890] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 29.623899] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0 [ 29.623909] ipmi_si: Adding SMBIOS-specified kcs state machine [ 29.626416] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0 [ 29.773664] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 29.942124] ACPI: bus type drm_connector registered [ 29.977132] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x0002a2, prod_id: 0x0000, dev_id: 0x20) [ 30.042227] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized [ 30.855824] [drm] radeon kernel modesetting enabled. [ 30.856039] radeon 0000:09:0d.0: vgaarb: deactivate vga console [ 30.857372] Console: switching to colour dummy device 80x25 [ 30.857826] [drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1028:0x016D 0x00). [ 30.857992] radeon 0000:09:0d.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (16M used) [ 30.857999] radeon 0000:09:0d.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF [ 30.858015] [drm] Detected VRAM RAM=128M, BAR=128M [ 30.858019] [drm] RAM width 32bits DDR [ 30.858267] [drm] radeon: 16M of VRAM memory ready [ 30.858276] [drm] radeon: 512M of GTT memory ready. [ 30.858312] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 30.880036] [drm] PCI GART of 512M enabled (table at 0x0000000001200000). [ 30.880091] radeon 0000:09:0d.0: WB disabled [ 30.880099] radeon 0000:09:0d.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 [ 30.880397] [drm] radeon: irq initialized. [ 30.880424] [drm] Loading R100 Microcode [ 30.887907] radeon 0000:09:0d.0: firmware: failed to load radeon/R100_cp.bin (-2) [ 30.887933] radeon 0000:09:0d.0: firmware: failed to load radeon/R100_cp.bin (-2) [ 30.887960] radeon 0000:09:0d.0: firmware: failed to load radeon/R100_cp.bin (-2) [ 30.887966] radeon 0000:09:0d.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 [ 30.887975] radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [ 30.887988] [drm:r100_cp_init [radeon]] *ERROR* Failed to load firmware! [ 30.888246] radeon 0000:09:0d.0: failed initializing CP (-2). [ 30.888252] radeon 0000:09:0d.0: Disabling GPU acceleration [ 30.888261] [drm] radeon: cp finalized [ 30.889302] [drm] No TV DAC info found in BIOS [ 30.889326] [drm] Radeon Display Connectors [ 30.889331] [drm] Connector 0: [ 30.889334] [drm] VGA-1 [ 30.889337] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 30.889344] [drm] Encoders: [ 30.889346] [drm] CRT1: INTERNAL_DAC1 [ 30.889350] [drm] Connector 1: [ 30.889354] [drm] VGA-2 [ 30.889358] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 30.889364] [drm] Encoders: [ 30.889367] [drm] CRT2: INTERNAL_DAC2 [ 30.889370] [drm] Connector 2: [ 30.889375] [drm] DVI-I-1 [ 30.889379] [drm] HPD1 [ 30.889383] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 30.889389] [drm] Encoders: [ 30.889392] [drm] CRT2: INTERNAL_DAC2 [ 30.889395] [drm] DFP1: INTERNAL_TMDS1 [ 30.890271] [drm] Initialized radeon 2.50.0 for 0000:09:0d.0 on minor 0 [ 30.975085] radeon 0000:09:0d.0: [drm] format RG16 little-endian (0x36314752) not supported [ 30.975094] radeon 0000:09:0d.0: [drm] format RG16 little-endian (0x36314752) not supported [ 30.975098] radeon 0000:09:0d.0: [drm] No compatible format found [ 31.021009] [drm] fb mappable at 0xF0040000 [ 31.021015] [drm] vram apper at 0xF0000000 [ 31.021016] [drm] size 5242880 [ 31.021018] [drm] fb depth is 24 [ 31.021021] [drm] pitch is 5120 [ 31.021199] fbcon: radeondrmfb (fb0) is primary device [ 31.171062] Console: switching to colour frame buffer device 160x64 [ 31.217655] radeon 0000:09:0d.0: [drm] fb0: radeondrmfb frame buffer device [ 39.409554] [drm] amdgpu kernel modesetting enabled. [ 39.409898] amdgpu: Virtual CRAT table created for CPU [ 39.409947] amdgpu: Topology: Add CPU node [ 40.082762] EXT4-fs (md127): re-mounted 6836c18b-7345-4600-a6bc-cc0516e48aa0 r/w. [ 40.547614] loop: module loaded [ 40.860476] EXT4-fs (md1): re-mounted 5e4bdd86-669e-4647-be9f-cdaf6f24755e r/w. [ 40.880135] EXT4-fs (md2): mounted filesystem 2a4977b3-f249-4ce0-819f-44fab277e5cd r/w with ordered data mode. Quota mode: none. [ 41.856193] audit: type=1400 audit(1754920533.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=1577 comm="apparmor_parser" [ 41.856225] audit: type=1400 audit(1754920533.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=1576 comm="apparmor_parser" [ 41.856234] audit: type=1400 audit(1754920533.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=1575 comm="apparmor_parser" [ 41.856240] audit: type=1400 audit(1754920533.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=1578 comm="apparmor_parser" [ 41.872260] audit: type=1400 audit(1754920533.108:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=1582 comm="apparmor_parser" [ 41.874519] audit: type=1400 audit(1754920533.112:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=1581 comm="apparmor_parser" [ 41.875276] audit: type=1400 audit(1754920533.112:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=1580 comm="apparmor_parser" [ 41.879443] audit: type=1400 audit(1754920533.116:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=1583 comm="apparmor_parser" [ 41.881697] audit: type=1400 audit(1754920533.120:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=1586 comm="apparmor_parser" [ 41.882133] audit: type=1400 audit(1754920533.120:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=1585 comm="apparmor_parser" [ 44.199247] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 44.355122] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 44.503142] netfs: FS-Cache loaded [ 44.703920] RPC: Registered named UNIX socket transport module. [ 44.703931] RPC: Registered udp transport module. [ 44.703933] RPC: Registered tcp transport module. [ 44.703936] RPC: Registered tcp-with-tls transport module. [ 44.703938] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 48.801667] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 48.807187] NFSD: Using legacy client tracking operations. [ 48.807194] NFSD: starting 90-second grace period (net f0000000) [ 51.050893] nvme nvme0: using unchecked data buffer [ 400.479809] kauditd_printk_skb: 101 callbacks suppressed [ 400.479818] audit: type=1400 audit(1754920891.014:113): apparmor="DENIED" operation="capable" class="cap" profile="/usr/bin/man" pid=3658 comm="man" capability=21 capname="sys_admin" [ 400.496776] audit: type=1400 audit(1754920891.030:114): apparmor="DENIED" operation="capable" class="cap" profile="/usr/bin/man" pid=3661 comm="man" capability=21 capname="sys_admin" [ 400.500433] audit: type=1400 audit(1754920891.034:115): apparmor="DENIED" operation="capable" class="cap" profile="/usr/bin/man" pid=3660 comm="man" capability=21 capname="sys_admin" [ 411.038503] audit: type=1400 audit(1754920901.574:116): apparmor="DENIED" operation="capable" class="cap" profile="/usr/bin/man" pid=3676 comm="man" capability=21 capname="sys_admin"